Highlights

Bang & Olufsen

This driver controls B&O Devices wich can also be controlled by the BeoRemote

App available in iOS and Android App Stores.

Power Management

The Audio systems are always online and will reply to commands instantly.

On the TV’s there is a way to keep the network port always online which is called Quick Start Timers and it is setup in the menu of the TV’s.

If this is not done “Wake on LAN” will need to be used to turn on the TV from standby (Reduces power consumption, but adds 25 sec to startup from deep sleep)

For simplicity it’s recommended to just configure the “Quick Start Timers” on the TV so the TV will turn on with a regular source selection and no “Wake On LAN” functionality is then needed.

The setting can be found by pressing “Menu” on the Remote and selecting SETUP -> POWER SAVING -> STANDBY -> QUICK START TIMERS

Recommended setting would be:

TIMER 1:

03:15 to 3:00

MO TU WE TH FR SA SU

TIMER 2:

00:00 to 00:00

In this way the device will go into sleep only for 15 minutes every day.

And the risk of the customer wanting to power up the device in that timeframe is minimal.

We do not recommend the device is configured so it will never go to deep sleep as some routines are only run when entering this deep sleep mode

Make sure that all days of the week are lit up. You will have to scroll down to each of the days to enable them.

If you choose to let the TV go to deep sleep mode and will be using WOL for powering up, it has to be enabled in the TV.

MENU->SETUP->POWER SAVING -> NETWORK

Download driver

https://www.dropbox.com/sh/izmgyn4c3gmgcu8/AAAkqRfXdgENHSfddkTGOVjya?dl=0

Support:

In case of any Question or order please contact:

info@stilus.ch

www.stilus.ch

Stilus SA
 Steigstrasse 2
 CH-8610 Uster

Phone: +41 43 355 75 00

Spezifikationen